System Fans - Dell XPS M1710 Service Manual

Back to Contents Page
System Fan(s)
Dell™ XPS™ M1710 Service Manual
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
Computer) before working inside the computer.
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the palm rest (see
6. Remove the two M2.5 x 5-mm screws from the fan(s), and then disconnect the fan cables (one cable is the fan LED
cable) from the system board.
7. Lift the fan(s) out of the computer.
1 M2.5 x 5-mm screws (2)
4 connectors on system board
(2)
Before Working Inside Your
Removing the Hinge
Removing the Display
Removing the Palm Rest).
2 fan for processor thermal-cooling
assembly
Computer.
Cover).
Assembly).
3 fan cables
Before Working Inside Your
(2)