Installation on flat roofs
1. Click and fasten the mounting rails
into clamping brackets.
2. Click the connecting chamber into
the clamping brackets.
3. Align the connecting chamber.
Note
The tube holders on the mounting
rails must be in line with those in
the connecting chamber; where
necessary, align with a piece of
string.
Hydraulic connections
Linking the connecting chamber
(cont.)
4. Tighten all screws.
5. Where several collectors are
installed side-by-side, continue
with "Connecting the connecting
chamber" on page 25, otherwise
continue with "Fitting the connec-
tion set" on page 26.
25