Intended Use - IVT MPC-110 User Manual

Tool specification
model
Voltage / frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Max cutting depth in steel [mm]
Max cutting depth in wood and plastic [mm]
Max diameter of cutable steel pipe [mm]
Blade external diameter [mm]
Blade internal diameter [mm]
N° of teeth
Blade material
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Vibration level [m/s2]
K
Weight [kg]
Safety class
Part list
1. Power cord
2. On/Off switch
3. Lock-off button
4. Front handle
5. Spindle lock
6. Upper guard of saw blade
7. Metal base plate
8. Lower guard
9. Cutting blade
10. Lower guard lifting rod
11. Storage for hexagon wrench
12. V-type notch
13. Hex bolt
14. Outer flange
15. Hexagon wrench

Intended use

This model of Multi purpose cutter is able to saw copper, iron,
aluminum, plastic, bakelite, plywood, gypsum board and
gypsum composite fiber board without replacing the blade.
alloy steel blade
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• On the tool, there may be also decals and further indications
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
• Never leave the tool unattended.
11
Instruction manual
MPC-110
230~50
500
4500
35
35
35
110
20
24
87,8
98,8
1,5
3
2
II
EN