Dell Latitude D400 Service Manual page 18

Hide thumbs Also See for Latitude D400:
Table of Contents

Advertisement

 
Replacing the Interposer
 
NOTICE:
Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.
1.  Attach the hard drive carrier to the new hard drive, and replace the two M3 x 3-mm screws.
2.  Carefully attach the interposer from the old hard drive by pushing it straight onto the hard drive. Ensure that the pins are oriented correctly. When the
interposer is attached correctly, four extra pins are on one side.
 
 
 
1  interposer  8267R
3.  Install the
hard
drive.
 
Back to Contents Page
 

Advertisement

Table of Contents
loading

Table of Contents