Removing The System Board - Dell Latitude E5400 Service Manual

Back to Contents Page
System Board
Dell™ Latitude™ E5400 Discrete Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the System Board

NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the hinge cover from the computer.
5. Remove the keyboard from the computer.
6. Remove the display assembly
7. Remove the palm rest from the computer.
8. Disconnect the modem data cable from the system board.
9. Turn the computer right-side up on the work surface.
10. Remove the two screws that secure the system board to the computer chassis.
11. Lift the left side of the system board to disengage it from the I/O board, then remove the system board from the computer and set it aside.
Back to Contents Page
Computer.
from the computer.