Dell OptiPlex 960 Service Manual page 3

1 system battery 2
3 battery socket tab 4
6. Install the new system battery.
a. Support the battery connector by pressing down firmly on the positive side of the connector.
b. Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
c. Press the battery straight down into the connector until it snaps into place.
7. Perform the procedure After Working on Your
8. Enter system setup (see the Dell
9. Properly dispose of the old battery as described in the safety information that shipped with your computer.
Back to Contents Page
positive side of battery connector
battery socket
Computer.
™
Technology Guide) and restore the settings you recorded in step 1.