Lubricating In Accordance With The Lubrication Schedule; Pedal Mechanism In Frame Tunnel; Chains In The Frame Tunnel - Husqvarna Rider ProFlex 18 Operator's Manual

Lubricating in accordance with the
lubrication schedule
The numbers in the following headings refer to the
lubrication points as described in "Lubrication
schedule" on page 55.

1. Pedal mechanism in frame tunnel

Lubricate the pedal mechanism in the frame tunnel.
Remove the cover over the frame tunnel by loosening
the two screws.
Work the pedals and lubricate the moving parts with an
oil can.
Lubricate the cables to the brake and drive pedals with
an oil can.
Lubricate the point "2. Chains in the frame tunnel" on
page 57 before replacing the cover to the frame tunnel.

2. Chains in the frame tunnel

Remove the cover from the frame tunnel, see "1. Pedal
mechanism in frame tunnel" on page 57.
Lubricate the chains in the frame tunnel with an oil can
or chain lubricant spray for motorcycles.
Lubricate the steering cable pulley axle with grease.
Move the pulleys to one side and brush grease on the
axle.
Replace the cover on the frame tunnel.
LUBRICATION
8009-340
8009-345
8009-346
57
English-