Parking Brake; Seat; Fuelling - Husqvarna Rider ProFlex 18 Operator's Manual

Parking brake

The parking brake is activated as follows:
1. Press down the parking brake pedal.
2. Completely depress the lock button on the
steering servo housing.
3. Release the parking brake pedal while keeping the
button pressed in.
The parking brake lock is automatically disengaged
when the parking brake pedal is pressed down.

Seat

The seat has a hinged mounting on the front edge and
can be tipped forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under the front
edge of the seat is moved to the left, after which the
seat can be moved backwards or forwards to the
desired position.
The seat springs can be adjusted by moving the rubber
blocks in their brackets on the underside of the seat.
Set both blocks in the front, centre or rear positions.

Fuelling

The engine should be run on a minimum of 87-octane
unleaded petrol (no oil mix). It can be beneficial to use
environmentally adapted alkylate petrol. See also
"Technical Data" concerning methanol and ethanol
fuels.
WARNING!
Petrol is highly flammable. Observe
caution and fill the tank outdoors,
(see the safety instructions).
PRESENTATION
8009-328
8009-602
8009-491
8009-330
19
English-