Snmp Menu - Epson EMP-1815 User Manual

Hide thumbs Also See for EMP-1815:

Table of Contents

List of Functions

SNMP Menu

You can set the SNMP

. To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be

managed by a network administrator.

Sub Menu

SNMP trap IP

You can register up to two for the SNMP trap notification destination.

address

1/ SNMP

The IP addressg registered in "Trap IP Address 2" is used when the IP address in "Trap IP Address 1" cannot be accessed.

trap IP address 2

You can enter a number from 0 to 255 in each field of the address.

However, the following IP addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Downloaded from ProjectorsManual.com Manuals

Function

Table of Contents

Table of Contents

Emp-1810