Sharp AL-1651CS Operation Manual page 74

TROUBLESHOOTING AND MAINTENANCE
Lamp indicator
Blinks
Error
indicator
Steadily
lit
MEMORY FULL, PRESS START TO
RESUME.
NO 2-SIDED COPY FROM BYPASS
TRAY.
NO 2IN1 COPY FROM
BYPASS TRAY.
NO 2IN1 COPY WITH MARGIN
SHIFT.
COPY RATIO CAN NOT BE
CHANGED IN 2IN1.
THIS MENU IS NOT SELECTABLE
WITH DATA.
INSTALL A TD CARTRIDGE.
NO *** SIZE TRAY
CHECK SPF/RSPF.
START TO RESUME.
LOAD **** PAPER INTO TRAY.
NO PC COMMUNICATION; CHECK
CABLE.
rewirte : ex. The bypass tray cannot be used for 2-sided copying and 2 IN 1 copying.Press the
[TRAY SELECT] key ( ) , and select the paper tray.
72
Indication
Display
REPLACE THE
DRUM
CARTRIDGE.
TD CARTRIDGE
IS NEAR EMPTY.
A DRUM
CARTRIDGE WILL
BE NEEDED
SOON.
Cause and remedy
The drum cartridge has reached the end of
its life. Replace it with a new drum
cartridge. (When the indicator blinks, the
machine does not operate.)
Toner is low. Consult your dealer to
purchase a new toner cartridge.
Less than 1000 sheets can be printed
with the current drum cartridge.
Consult your dealer to purchase a new
drum cartridge.
Data is being held in memory. Print the
data or clear it from memory.
Two sided printing or 2 IN 1 copying is
selected when the bypass tray is
already selected ,or the bypass tray is
selected when two-sided printing or 2
IN 1 copying is already selected.
2 in 1 copy and margin shift are both
enabled.
2 in 1 copy and reduce/enlarge copy
are both enabled.
This appears if you attempt to change
a user program setting while a copy or
print job is in progress.
The TD cartridge is not installed
correctly. Reinstall the TD cartridge.
There is no paper for printing. Press
the [MODE SELECT] key to switch to
printer mode and follow the instructions
in the display.
("***" indicates paper size)
An original remains on the document
glass.
Printing stops if the tray's paper size
setting is different from the paper size
setting in the printer driver. Make sure
that the settings are the same and then
press the [CLEAR] key (
[CLEAR ALL] key (
print procedure.
("****" indicates paper size)
The machine is not correctly connected
to the computer. Check the cable
(when using the scanner function).
Page
) or the
). Repeat the
86
85
86
34
37
30
35
35
38
28
35
64
85
-
24
19
46
47