Rear Wheel - Yamaha XJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
7. Push down hard on the handlebar
several times to check for proper
fork operation.
6

Rear wheel

To remove the rear wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut and the brake
caliper bolts.
1. Locknut
2. Drive chain slack adjusting bolt
3. Axle nut
6-33
EAU25080 2. Disconnect the brake torque rod
from the brake caliper bracket by
removing the nut and the bolt.
EAU25160
EWA10820
1. Bolt
2. Brake torque rod
3. Nut
4. Brake caliper bracket
5. Brake caliper
3. Place the motorcycle on the cen-
terstand.
4. Remove the axle nut and the brake
caliper by removing the bolts.
CAUTION:
Do not apply the brake after the
brake caliper has been removed,
otherwise the brake pads will be
forced shut.
ECA11300