Rear Brake Light Switch Adjustment - Yamaha XJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
the braking performance, which may
result in loss of control and an acci-
dent.
6
Rear brake light switch
adjustment
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, adjust the brake light switch
as follows.
1. Remove panel A. (See page 6-5.)
2. Turn the adjusting nut while hold-
ing the rear brake light switch in
place. To make the brake light
come on earlier, turn the adjusting
nut in direction (a). To make the
brake light come on later, turn the
adjusting nut in direction (b).
6-17
EAU22290 3. Install the panel.