Yamaha FJR1300A Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
stalls, or the sidestand is lowered, then
the " " indicator light will go off (the
"SET" indicator light will not flash).
If the cruise control system is automat-
ically deactivated, please stop and
confirm that your vehicle is in good op-
3
erating condition.
Before using the cruise control system
again, activate it using the power
switch.
TIP
In some cases, the cruise control sys-
tem may not be able to maintain the set
cruising speed when the vehicle is
traveling uphill or downhill.
 When the vehicle is traveling up-
hill, the actual traveling speed may
become lower than the set cruis-
ing speed. If this occurs, acceler-
ate to the desired traveling speed
using the throttle.
 When the vehicle is traveling
downhill, the
speed may become higher than
the set cruising speed. If this oc-
curs, the setting switch cannot be
used to adjust the set cruising
speed. To reduce the traveling
speed, apply the brakes. When
the brakes are applied, the cruise
control system will become deac-
tivated.
Self-diagnosis device
1 2 3
1. Engine trouble warning light "
2. Cruise control system indicator light "
3. Cruise control setting indicator light "SET"
4. Error code display
The cruise control system will also be-
come deactivated when an irregularity
with any of the vehicle systems is de-
actual traveling
tected. The "SET" indicator light will go
off and the "
flash. You will not be able to use the
cruise control system while the engine
trouble warning light is on, or while the
cruise control system is malfunction-
ing.
If the cruise control system is not
working correctly, the "
light will flash. If this occurs, turn the
GEAR
N cruise control system off and have a
A.TEMP ˚C Yamaha dealer check it.
25
C.TEMP ˚C
Lo
TIME TRIP
NOTICE
0:06
If the display indicates an error
code, the vehicle should be checked
4
as soon as possible in order to avoid
engine damage.
"
"
" indicator light will
3-9
WARNING
" indicator
EWA16361
ECA11591