Adjusting A Headlight Beam - Yamaha GRIZZLY 450 YFM450DF Owner's Manual

4. Remove the burnt-out bulb by pulling it out.
5. Insert a new headlight bulb into the bulb hold-
er by pushing it in. NOTICE: Do not touch
the glass part of the headlight bulb to keep
it free from oil, otherwise the transparency
of the glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.
1. Do not touch the glass part of the bulb.
6. Install the bulb holder by pushing it in and
turning it clockwise.
7. Install the bulb holder cover and the cover at
the rear of the headlight. NOTICE: Make
sure the headlight bulb holder cover is se-
curely fitted over the bulb holder and seat-
ed properly.
8. Adjust the headlight beam if necessary.
EBU25552

Adjusting a headlight beam

ECB00691
[ECB00652]
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight
beam adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
8-59
[ECB00672]
8