Table of Contents
Advertisement
TO VISUALLY SEARCH FOR DESIRED POINTS
When either F.FWD or REW is pressed in the PLAYBACK
mode, the speed search picture will appear. When pressed
twice the search picture will increase in speed. Speed
search times depend upon the speed used (SP or LP)
during recording. To rewind or fast forward a tape, press
STOP and then press REW or F.FWD.
SPEED SEARCH TIMES
PICTURE SEARCH SPEED
TAPE SPEED
PRESS ONCE
SP (Standard Play)
PAL
LP (Long Play)
SP (Standard Play)
NTSC
Press REW once or twice in the PLAYBACK mode.
Press F.FWD once or twice in the PLAYBACK mode.
To return to playback, press PLAY.
STILL PICTURE
1
Press PAUSE/STILL in the PLAYBACK mode.
To prevent damage to the tape, STILL playback
is automatically resumed to the PLAY mode after
5 minutes.
2
To continue the normal playback, press PLAY.
FRAME BY FRAME ADVANCE
Press PAUSE/STILL during STILL playback.
The still picture will advance by one frame each time you
press the button. Hold the button for continuous frame by
frame viewing.
Press PLAY again to resume normal playback.
SLOW MOTION PLAYBACK
Press SLOW in the PLAYBACK mode. Each additional
press of SLOW will change the slow speed.
Press PLAY again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK AD-
JUSTMENT
If noise bars appear in the picture during slow motion, press
TRK/SKIP + or – to reduce the noise bars.
If the still picture jitters excessively, press TRK/SKIP + or –
to stabilize the still picture.
NOTES:
•
The audio output is muted during SPEED SEARCH
and STILL.
•
A few noise bars will appear on the picture during
SPEED SEARCH.
•
It is normal for the picture to be noisy in the STILL
mode.
PRESS TWICE
5 X
7 X
7 X
13 X
3 X
5 X
SPECIAL PLAYBACK
NTSC TAPE PLAYBACK
Your TV/VCR can playback Video tapes recorded in the
NTSC Colour System (TV system usually used in
America and Japan).
Load a NTSC recorded tape
(When loading a cassette tape
without an erase prevention tab,
playback will start automati-
cally).
To play the NTSC tape press PLAY. Your TV/VCR will
playback Video tapes recorded using NTSC Standard
play (SP), Long play (LP) and Extended play (EP).
However there will be a deterioration in
sound quality in the Long play and Extended play modes.
TO WATCH A TAPE REPEATEDLY
1
Press MENU.
Press ▲ or ▼ to select AUTO
REPEAT option.
2
Press
to select the ON
position.
3
Press MENU to return to normal TV screen. If you
press PLAY, the TV/VCR will repeat playing the
video tape until the repeat mode is cancelled (you can
still stop the tape by pressing STOP).
NOTE:
To cancel repeat mode, follow above steps 1 and 2,
then press A to select the OFF position. Press MENU to
return to the TV.
TIMER REC SET
AUTO REPEAT
OFF
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
/
ENTER
: ENTER
EXIT
: MENU
TIMER REC SET
AUTO REPEAT
ON
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
/
ENTER
: ENTER
EXIT
: MENU
23
Hide quick links:
Advertisement
Table of Contents
