System - D-Link DCS-936L User Manual

Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local
You may save your current camera configuration as a file on your computer
by clicking Save Configuration.
Hard Drive:
Locate a pre-saved configuration by clicking Browse... and then restore
Load From
Local Hard the pre-defined settings to your camera by clicking Load Configuration.
Drive:
Restore You may reset your camera and restore the factory settings by clicking
To Factory Restore Factory Defaults.
Defaults:
Reboot Device: This will restart your camera.
Schedule You can schedule the camera to reboot according to a schedule. Select
Device Reboot the days and time you want the camera to automatically reboot.
D-Link DCS-936L User Manual

System

45