Handlebar Switches - Yamaha XJ6SAP Owner's Manual

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
5. Hazard switch " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU1234A Right
1. Engine stop switch "
2. Siren switch "OFF/SIREN"
3. Patrol switch "S/M/P/OFF"
4. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
1
turned to the center position.
2
Horn switch "
Press this switch to sound the horn.
3
4
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
/ "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12350
"
Start switch "
Push this switch to crank the engine
with the starter. See page 5-1 for start-
EAU12400
ing instructions prior to starting the en-
/ "
gine.
" for the high
The engine trouble warning light and
EAU12460
ABS warning light will come on when
/ "
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
". When re-
3-12
EAU12500
"
EAU12660
3
/ "
" before starting
" to
EAU12711
"
EAU42340