Yamaha XJ6SAP Owner's Manual page 55

2. Remove the quick fastener and
the bolts, and then take the cowl-
ing off.
1
2
3
1. Cowling B
2. Bolt
3. Quick fastener
3. Disconnect the turn signal light
lead connectors.
1
1. Turn signal light lead connector
PERIODIC MAINTENANCE AND ADJUSTMENT
To install a cowling
1. Connect the turn signal light lead
connectors.
2. Place the cowling in the original
position, and then install the bolts
and the quick fastener.
3. Install panel B or C.
Panel A
To remove the panel
Remove the bolt and the quick fasten-
er, and then take the panel off.
6-9
1
1. Panel A
2. Bolt
3. Quick fastener
To install the panel
Place the panel in the original position,
and then install the bolt and the quick
fastener.
EAU46770
Panels B and C
To remove a panel
1. Remove the bolts.
2
3
6
EAU47881