To install the cowling
1. Connect the speedometer unit couplers.
2. Install cowling A by installing the bolts, nuts
and washers.
3. Install panel B.
4. Install cowling B.
Cowling B
To remove the cowling
1. Remove the seat. (See page 4-12.)
2. Pull the fuel tank breather hose out of the han-
dlebar cover.
8
1. Fuel tank breather hose
2. Handlebar cover
3. Pull off the handlebar cover.
ECB00740
NOTICE
Do not disconnect the main switch coupler.
4. Remove the fuel tank cap by turning it coun-
terclockwise.
ECB00750
NOTICE
G
Make sure that no foreign material enters the
fuel tank.
G
Be sure to install the fuel tank cap immedi-
ately after removing and installing the cowl-
ing.
1. Fuel tank cap
8-11