1. Differential gear oil drain bolt
4. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Differential gear oil drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
5. Refill with the specified amount of the recom-
mended differential gear oil.
TIP
G
Do not exceed the specified differential gear oil
quantity when filling. Overfilling will cause the oil
to seep out of the breather hose during and after
riding.
G
The differential gear case capacity is greater
than the recommended oil quantity, therefore
the oil level cannot be accurately checked from
the oil filler hole.
Recommended differential gear oil:
See page 10-1.
Oil quantity:
0.35 L (0.37 US qt, 0.31 Imp.qt)
ECB00410
NOTICE
Be sure no foreign material enters the differen-
tial gear case.
6. Install the oil filler bolt, and then tighten it to the
specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
7. Check the differential gear case for oil leak-
age. If oil is leaking, check for the cause.
8-26
8