Main Features: Remote Unit; Battery Installation; Before You Begin - Oregon Scientific Scientific Cable Free Weather Station BAR928 User Manual

PRESSURE UNIT SLIDE SWITCH
H
Selects between mb/hPa and inHg display
MOON PHASE SCANNER
S
Displays the current moon phase or that of the date checked
THERMO BUTTON
T
Sets the unit in indoor or outdoor-remote temperature mode
MEMORY BUTTON
U
Displays the maximum or minimum temperature or indoor
relative humidity or erases the memory
HISTORY BUTTON
V
Displays the pressure history of previous hours
UP ( ) AND DOWN (
W
Increases or decreases the value of a setting, scan the
moonphase status
ALARM ON/OFF BUTTON
X
Displays the alarm time or sets the alarm status
MODE BUTTON
Y
Changes the display mode of the clock or triggers the clock
setting mode
RESET BUTTON
Z
Resets the unit by returning all settings to their default values
BATTERY COMPARTMENT
AA
Accommodates four UM3 or AA-size batteries
TABLE AND CONTROL STAND
AB
Acts as control panel and supports the unit when lying flat.

MAIN FEATURES: REMOTE UNIT

BAR928-E R1 OP
) BUTTONS
2
LCD
A
Displays the current temperature monitored by the remote
unit
LED INDICATOR
B
Flashes when the remote unit transmits a reading
° °
C/ F SLIDE SWITCH
C
Selects between Centigrade (°C) and Fahrenheit (°F)
RESET BUTTON
D
Returns all settings to default values
BATTERY COMPARTMENT
E
Accommodates two UM4 or AAA-size batteries
WALL-MOUNT HOLDER
F
Supports the remote unit in wall-mounting
REMOVABLE TABLE STAND
G
For standing the remote unit on a flat surface

BEFORE YOU BEGIN

For best operation,
1. Insert batteries for remote units before doing so for the main unit.
2. Position the remote unit and main unit within effective transmis-
sion range, which, in usual circumstances, is 30 meters.
Though the remote unit is weather proof, it should be placed away
from direct sunlight, rain or snow.

BATTERY INSTALLATION:

REMOTE UNIT
The remote unit uses two UM4 or AAA-size batteries. To install
them,
1. Remove the screws on the battery compartment.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Select the temperature display unit on the °C/°F slide switch.
4. Replace the battery compartment door and secure its screws.
Replace the batteries when the battery low (BATT) indicator of the
outdoor temperature window lights up.
2
8/21/04, 11:54 PM