Samsung WD80J5 User Manual page 54

Troubleshooting
Problem
LC
LC1
UB
3C
UC
HC
54 English
WD80J5430AW_03588L-05_EN.indd 54
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "LC"/"LC1" code, the washer
do draining for 3 minutes. During this time, the Power
button is inoperative.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "UB" check message
will be shown in the display.
Check the Motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check
• If the information code remains, contact a customer service
centre.
Action
2015/12/18 14:43:52