Samsung WD80J5 User Manual page 37

Options
Option
Intensive
Pre Wash
Bubble Soak
Soak
Delay End
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 1 to 19 hours (in 1 hour increments). The hour displayed indicates the time
the wash will finish.
1. Select a course. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to finish a two-hour course 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then,
what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.
Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
WD80J5430AW_03588L-05_EN.indd 37
• For badly soiled laundry. The operation time for each cycle is
longer than normal.
• This will add a preliminary washing cycle before the main
wash cycle.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 20 or30 minutes
to 3 cycles: Cotton, Synthetics, and Baby Care.
• This option effectively removes stains by soaking the laundry.
• Each soak cycle spins the drum for 1 minute and stands still
for 4 minutes, totaling 6 times for 30 minutes.
• The displayed time refers to the end time of a selected course.
3:00 pm
Start
Description
5:00 pm
End
English 37
2015/12/18 14:43:49