Product Overview; Filling The Engine With Oil - Toro 20658 Operator's Manual

3. Filling the Engine with Oil

Procedure
Important: Your mower does not come with oil
in the engine.
1. Remove the dipstick (Figure 7).
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 7). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
Figure 7

Product Overview

1. Cutting height lever
2. Fuel tank cap
3. Recoil start handle
4. Control bar lock
5. Blade control bar
6. Handle
1. Grass bag
6
Figure 8
7. Ignition toggle switch
8. Oil fill/dipstick
9. Washout port
10. Spark plug
11. Air filter
Figure 9
2. Side discharge chute