Disconnect Coolant Hose; Removing Coolant Line; Removing Union Screw - Briggs & Stratton MS-1055 Repair Manual

TURBOCHARGER
7. Remove coolant outlet hose.
8. Remove coolant inlet line bracket screw.
9. Remove two nuts, then remove coolant line
assembly from turbocharger .
10. Remove oil inlet line union screw at turbo-
charger. Discard the washer.
8
14
OUTLET HOSE
Fig. 17 – Disconnect Coolant Hose
BRACKET
Fig. 18 – Remove Clamp
Fig. 19 – Removing Coolant Line
Fig. 20 – Removing Union Screw