Table of Contents
Advertisement
2. Install camshaft bearing, Fig. 7.
a. Use camshaft bearing driver, Tool #19422.
NOTE: Notch on camshaft bearing must face out.
Be sure oil hole in bearing is aligned with
oil hole in cylinder block.
REPLACING CAMSHAFT PLUG
1. Remove rear camshaft plug, Fig. 8.
a. Use a wood dowel or brass rod to prevent
damage to camshaft bearing.
2. Install new camshaft plug using camshaft bearing
driver, Tool #19422.
a. Install camshaft plug flush with cylinder block,
Fig. 9.
If cylinder block is being resized, the following
parts should be removed so that cylinder block
may be thoroughly cleaned.
1. Remove oil pressure switch, water gallery plug
and oil filter adapter, Fig. 10.
6
CYLINDER BLOCK INSPECTION AND REPAIR
Fig. 7 – Installing Cam Bearing
Fig. 8 – Removing Camshaft Plug
Fig. 9 – Installing Camshaft Plug
SWITCH
Fig. 10 – Removing Oil Pressure Switch
PLUG
ADAPTER
3
Hide quick links:
Advertisement
Table of Contents
