Adjusting The Self-Propel Drive; Product Overview - Toro 22291 Operator's Manual

through 6 until the oil level is at the Full mark on
the dipstick.
•
If the oil level is above the Full mark on the
dipstick, drain the excess oil until the oil level on
the dipstick is at the Full mark. Refer to Changing
the Engine Oil (page 18).
Important: If the oil level in the crankcase is
too low or too high and you run the engine,
you may damage the engine.
7. Insert the dipstick into the filler neck and rotate the cap
clockwise until it is tight.
4

Adjusting the Self-propel Drive

No Parts Required
Procedure
Important: You must adjust the self-propel-drive cable
before you operate the machine for the first time. Refer
to Adjusting the Self-propel Drive (page 19).

Product Overview

1. Handle
2. Self-propel-drive bar
3. Blade-control bar
4. Rear door
5. Fuel-tank cap
6. Air cleaner
11
Figure 8
7. Spark plug
8. Cutting-height lever (4)
9. Oil fill/dipstick
10. Grass bag
11. Recoil-start handle