Tighten axle screw 1 to speci-
fied torque.
Axle screw in front quick-
release axle
22 lb/ft (30 Nm)
Tighten left-hand axle clamping
screws 2 to appropriate torque.
Pinch bolt on quick-re-
lease axle
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
If they have been tightened,
loosen right-hand axle clamping
screws 1 again.
Remove front wheel stand.
without center stand
OE
Remove auxiliary stand.
Place right-hand and left-hand
brake caliper on brake rotor.
8
95
z