BMW F 800 GS Adventure Rider's Manual page 106

8
104
Install cover 1.
Replace the LED for brake
and rear light
z
The LED tail light can only
be completely replaced.
Please contact a specialist
service facility for this purpose,
preferably an authorized
BMW Motorrad retailer.
Removing bulbs in front
and rear turn indicators
Park the motorcycle, ensuring
that the support surface is firm
and level.
Switch off ignition.
Remove screw 1.
Remove the lens from the
housing by pulling it outward
on the side with the screw.
Remove bulb 1 from the lamp
housing by turning it counter-
clockwise.
Installing bulbs in front
and rear turn indicators
Replacing a defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
To protect the glass on the
new bulb against contamina-
tion, always use a clean, dry
cloth to hold it; do not touch
with bare fingers.