How To Spray; Spray Tip Installation - Graco GX series Operation, Parts

How to Spray

How to Spray

Spray Tip Installation

To prevent spray tip leaks make certain spray
tip and tip guard are installed properly.
1. Perform Pressure Relief Procedure,
page 13.
2. Engage trigger lock.
3. Verify spray tip and tip guard parts are
assembled in the order shown.
SPRAY
TIP
RUBBER
GASKET/
TIP
METAL SEAL
GUARD
RETAINING
NUT
a. Use spray tip to align gasket and
seal in the tip guard.
18
b.
c.
4. Screw spray tip assembly onto the gun
and tighten.
ti27480a
ti27140a
ti27143a
Spray tip must be pushed all the
way into the tip guard. Turn spray tip
to push down.
Turn the arrow shaped handle on
the spray tip forward to the spray
position.
ti27145a
3A3212C