Configuring The Access Point - D-Link DWL-8710AP Quick Installation Manual

4. Choose the location where you want to mount
the AP and place the strap around the pole.
Tighten and lock the strap to secure the pole
mount bracket with the AP to the pole.
Figure 16: AP placement orientation
5. Remove the protective caps covering the
antenna ports on the AP, if any. Next, attach the
2 antennas marked "2.4 GHz" to the designated
2.4 GHz connectors and the 2 antennas marked
"5 GHz" to the designated 5 GHz connectors
on the AP. The DWL-8710AP is now ready to be
connected to the network.
Figure 17: Attaching the antennas
6

Configuring the Access Point

To configure the DWL-8710AP, simply connect the
AP directly to a computer and configure it through
its Graphical User Interface (GUI).
For more detailed information on how to set up and
configure the DWL-8710AP, please refer to the User
Manual.