Page 1
Getting started with Getting started with Logitech® z533 Multimedia Speaker System Logitech® z533 Multimedia Speaker System...
Page 2
Do not disassemble or expose to conducting MHz and that these radars could cause interference and/or damage to returned to the point of purchase or such other place as Logitech may accordance with the instructions, may cause harmful interference to radio at plugs, convenience receptacles, and the point where they exit from materials, moisture, liquid, or heat above 54°...
Page 3
Logitech z533 Multimedia Speaker system Set-up 1. Plug the right satellite cable into the black subwoofer jack. 2. Plug the left satellite cable into the blue subwoofer jack. 3. Plug the power cord into an electrical outlet. English 3...
Page 4
Logitech z533 Multimedia Speaker system 4. A. If you have a 3.5mm outlet on your device: - Insert the 3.5mm to 3.5mm cable plug from the subwoofer into the audio jack on your device B. If you have a RCA outlet on your device:...
Page 5
- Insert the 3.5mm to 3.5mm cable plug from the wired remote into the 3.5mm outlet on your device 5. Switch ON your Multimedia Speaker System z533 by turning clockwise the volume knob located on top of the wired remote. You will notice a “click” sound once the system is ON (the LED in front of the wired remote will also turn on) English 5...
ADJUSTING BASS VOLUME BASS To adjust the bass level of your Multimedia Speaker System z533, move the bass slider located on the left of the wired remote - Move the slider clockwise to increase bass - Move the slider counter-clockwise to reduce the bass 6 English...