Power Management Setup - Abit NF8 Series User Manual

3-14 Chapter 3

3-6. Power Management Setup

ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Power Button Function:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Restore on AC Power Loss:
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system's power remains off. You must
press the Power button to power-on the system.
[Power On]: When
power returns after an AC power failure, the system's power will be powered on automatically.
[Former-Sts]: When power returns after an AC power failure, the system will return to the state where
you left off before power failure occurs. If the system's power is off when AC power failure occurs, it
will remain off when power returns. If the system's power is on when AC power failure occurs, the
system will power-on when power returns.
CPU Thermal-Throttling:
This item controls the CPU speed by cutting down its regular power to a percentage during the STR
(Suspend To RAM) state.
Cool 'n' Quiet Control:
This option enables or disables the AMD K8 cool and quiet function.
NF8 Series