Power Management Setup Menu - Abit AB-AT7-MAX2 Manual

Introducing the BIOS
Back to Integrated Peripherals Setup Menu Here:
Init Display First:
Two options are available: PCI Slot or AGP. The default setting is PCI Slot. When you install more than
one display card, you can choose either a PCI display card (PCI Slot) or an AGP display card (AGP) to
display the boot-up screen. If you have only installed one display card, the BIOS will detect which slot
(AGP or PCI) you installed it, and everything will be taken care of by the BIOS.

4-6. Power Management Setup Menu

When the computer operates normally, it is in Normal mode. In this mode, the Power Management
Program will monitoring the access to video, I/O ports and drives, and the operating status of the
keyboard, mouse and other device. These are referred to as Power Management Events. In cases where
none of these events occur within setting time, the system enters the power saving mode. When one of the
controlled events occurs, the system immediately returns to normal mode and operates at its maximum
speed.
1. In the Main Menu, select "Power Management Setup" and press <Enter>. The following screen is
displayed:
2. You can use the arrow keys to move between the items. Use PgUP, PgDn, + or - key to change the
values. When you have finished setting up the chipset, press <Esc> to go back to the main menu.
3. After you have configured the Power Management feature, press <Esc> to go back to the Main Menu.
We are now going to briefly explain the options in this menu:
Figure 3-7A. Power Management Setup Main Menu
4-25
User's Manual