Advertisement
Change the incline of the treadmill, if desired.
6
To increase or decrease
the incline, hold down the
top or bottom of the incline
button. Important: Do not
change the incline of the
treadmill by placing ob-
jects under the treadmill.
Change the incline only
as described above.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 45 lbs (20 kg) in order to
raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
10
When you are finished exercising, stop the
7
walking belt and remove the key.
Step onto the foot rails,
stop the walking belt,
and remove the key
from the console. Store
the key in a secure
place. After the key is
removed, the displays
will remain on for
about five minutes.
Note: Any time that the walking belt is stopped
and no console buttons are pressed for five min-
utes, the displays will automatically turn off in
order to conserve the batteries.
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBE
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will
deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and a earth-
ing plug. Plug one end of the cord into the treadmill. Plug the
power cord into an appropriate outlet that is properly in-
stalled and earthed in accordance with all local codes and
ordinances.
DANGER:
Improper connection of the
equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a quali-
fied electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not
modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a
qualified electrician.
TM
, a high-performance lubricant. IMPOR-
7
Advertisement
