Download Print this page

Pro-Form PETL32062 User Manual page 6

Advertisement

4. With the help of a second person, carefully lower the Left
and Right Uprights (1, 44) until the handrails are resting
on the floor.
5. Attach six Base Pads (57) to the bottom of the Base (59)
in the indicated locations. Note: One extra Base Pad is
included.
See drawing 4 above. With the help of a second person,
raise the Left and Right Uprights (1, 44) until the Base
(59) is resting flat on the floor.
Before moving the treadmill, see HOW TO MOVE THE
TREADMILL on page 11.
6. Align the holes in the Book Rack (62) with those in the
Console Base (9). Attach the Book Rack to the Console
Base with the four remaining Screws (75) as shown.
7. Remove the backing from the Adhesive Clip (77). Press
the Adhesive Clip onto the Rear Roller Endcap (78) in the
indicated location. Press the Allen Wrench (76) into the
Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a
mat under the treadmill. For information on ordering a
mat, see ORDERING REPLACEMENT PARTS on the
back cover.
6
4
44
1
Handrails
59
5
57
59
6
62
75
75
9
7
77
78
76
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the frame guide. Make sure that the storage
latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 34
o
C.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the stor-
age latch is closed fully over the frame guide.
1. Hold the upper ends of the handrails. Place one foot on
the base as shown.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back, or the base
pads may come off. To reduce the risk of injury, use
extreme caution whilst moving the treadmill. Do not
attempt to move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the tread-
mill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left thumb, slide open the storage latch
and hold it open. Pivot the treadmill until the frame and
foot rail are past the storage latch.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of in-
jury, bend your legs and keep your back straight.
Storage
Latch
Closed
Frame
Guide
Base
Front Wheels
Storage
Latch
Open
11

Advertisement

loading

This manual is also suitable for:

525 si