Samsung GT-S3370 Service Manual page 78

Disassembly and Assembly Instructions
13
Place PBA ASS'Y on FRONT
1) Be careful not to make scratch and molding damage!
15
Assemble REAR by upper to lower
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
14 Assemble LCD CONN after insert TSP FPCB
until fit on silk line. Attach volume key FPCB
after remove release paper
* fit on silk line
1) Be careful not to make scratch and molding damage!
2) Insert TSP FPCB fit on silk line
3) Assemble connector until occur 'click' sound
16 Screw 6 points at the REAR case.
1) Be careful not to make scratch and molding damage!
2) Torque adjust to 1.2 kgf/m
11-8