9-6. Camera
Camera does not work
Check the CAM_EN signal
of R614 when CAM mode
Check Camera supply
voltage 1.5,1.8,2.8V of
C610, C605, C609, C603,
Check camera connector.
Change the Camera module.
Yes
is activated.
Yes
C604
Yes
Yes
END
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
No
CHECK UCP300.
resolder or change
No
CHECK the U602.
resolder or change
No
Reconnect the Camera FPCB.
9-37
Flow Chart of Troubleshooting