Disassembly and Assembly Instructions
5
Assemble SPK module
* Be careful to intenna pin
depression
* Check locker assembly
1) Be careful not to make scratch and molding damage!
2) Be careful to intenna pin depression
7
Assemble CAMERA module after replace
release paper.
1) Be careful not to make scratch and molding damage!
2) assemble connector until occur 'click' sound
status
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
Screw 2 points at the PBA
1) Be careful not to make scratch and molding damage!
8
Place TSP on FRONT after putting TSP FPCB
on FRONT hole.
1) Be careful not to make scratch and molding damage!
11-6