11. Disassembly and Assembly Instructions
11-1. Disassembly
1
Unscrew 6 points at the REAR case
1) Be careful not to make scratch and molding damage!
3
lift up PBA after disassemble 1 → 4 sequence
1) Be careful not to make scratch and molding damage!
2) Be careful FPCB damage when disassemble volume
key
* Disassemble HOOK
after pulling FRONT to
side
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Disassemble the REAR as below sequence
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage IF COVER
Disassemble the Keypad
4
1) Be careful not to make scratch and molding damage!
11-1