Oregon Scientific Super Guard 58J Features And Benefits

FEATURES AND BENEFITS
58J, 58L, 59J, AND 59L CHAINS
These new Oregon
popular families of chain. Users of our previous 59LG-series and 52-series chains will find it easy to
make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers
performance superior to its predecessors in all cutting modes. The new cutter is mounted on our
proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon
58/59 Super Guard
of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain.
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.
Safety / ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing
features. These chains do not meet the kickback requirements for low-kickback chains.
Recommended Use: Professional use by loggers and forest firefighters who prefer
large saws and .404"-pitch chain.
FEATURES
• Chisel cutters, factory ground with
optimum angles
• Sharpens with a 7/32" round file
• Depth gauge is ramp-shaped,
and offset
• Clean-ground gullet
• Top-plate-angle
witness mark
• Lubrilink ™ tie straps
• Long, high-strength cutter top plate
• Made from patented OCS-01 steel-alloy
material (U.S. patent no. 5,772,957)
Because every
cut counts
59L F&B A107035 AB 0301
® .404"-pitch Super Guard
®
gives professional timber cutters who use .404"-pitch chains what they want: out-
CHAIN PART
NUMBER PITCH
58J .404"
58L
59J
59L
® chains have been carefully developed to replace two
BENEFITS
• Superior cutting speed (nose-clear, nose-buried,
and boring)
• Smooth, easy cutting, minimal feed force required,
minimizes operator fatigue
• Easy filing and maintenance
• Reduces roughness and kickback energies
without affecting performance
• Maximum chip flow, helps prevent clogs from debris
• No out-of-the-box filing is needed
• Easy, consistent sharpening
• Improved chain and bar lubrication
• More oil stays where it's needed – on the chain
• The volume of oil required is reduced
• Long working life, durable, resists breakage
• Tougher than the steel on other chains, 20% tougher
at room temperature, 125% tougher at minus 20° F.
CUTTER
GAUGE SEQUENCE
.058" Skip
.058" Standard
.063" Skip
.063" Standard
CHAIN
CUTTER KICKBACK-REDUCING
TYPE FEATURES
Chisel Ramp-shaped
Depth Gauges
®