Oreck XL2800H2 User Manual

Oreck XL2800H2 User Manual

High speed upright vacuum cleaner with micro sweep cleaning system

Advertisement

S I M P L Y
A M A Z I N G
U
'
G
SER
S
UIDE
XL2800H2
HIGH SPEED UPRIGHT VACUUM
CLEANER WITH
CLEANING SYSTEM
•IMPORTANT•
SAVE THIS BOOKLET!
Includes:
• Safety Warnings
• Warranty
• Operating Instructions
• Trouble Diagnosis
• Accessories

Advertisement

Table of Contents
loading

Summary of Contents for Oreck XL2800H2

  • Page 1 S I M P L Y A M A Z I N G ™ ’ UIDE XL2800H2 HIGH SPEED UPRIGHT VACUUM CLEANER WITH ™ CLEANING SYSTEM •IMPORTANT• SAVE THIS BOOKLET! Includes: • Safety Warnings • Warranty • Operating Instructions • Trouble Diagnosis...
  • Page 2: Table Of Contents

    When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: • Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
  • Page 3: Maintenance, Customer Service, Warranty, And Accessories

    God, the use of voltages other than indicated on the serial number plate of this product or service of this product by other than ORECK or an ORECK Factory Authorized Service Center.
  • Page 4: Assembly

    ssembly To assist you in identifying components of your vacuum, the parts have been numbered as follows: 1 Handle section, upper 2 Tube, lower 3 Power head 4 Outer bag 5 Paper filter dust bag 6 Power cord 7 Retaining spring 8 Bag tension bar 9 Zip fastener 10 On/off switch...
  • Page 5: Operating Instructions

    Operating Recommendations This new ORECK XL High-Speed Upright is one of the finest, fastest, and strongest units in its class. You’ll love the way it cleans, gets under things, and it’s SO lightweight and easy to use.
  • Page 6: How To Replace A Worn Belt

    ow to eplace a WARNING: Unplug cord from electrical outlet before servicing. Remove the replacement belt from the storage channel. Remove the door by removing the hold down screw located on side of power head. Slide the door forward by prying open with a screwdriver or coin.
  • Page 7: Using A Fresh Air Tab

    See illustration F. NOTE: If the above actions do not correct the problem, contact an ORECK authorized service center or call the customer service center. US: 1-800-989-3535 CANADA: 1-888-676-7325 IMPORTANT: On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet.
  • Page 8: Troubleshooting Guide

    “old” or “new” match at each end. ©2002 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned and used under the authorization of Oreck Holdings, LLC. 75268-05 REV D 12/02 ECN# R-6815...

Table of Contents