Motorola APX 7000 User Manual page 120

be configured in the quick test list of the CPS. You
can choose from the quick text list, including queries
if present.
You shall receive a service advertisement message
to indicate the Query is available after you have
successfully logged in the radio with a Two-Factor
Authentication.
Note: The query server must be selected as the
destination so that it can receive the query message
and respond the query with text message. The query
server must be an entry in the data user list in the
CPS.
1 Perform one of the following actions:
• To access this feature via a preprogrammed
button, press the preprogrammed TMS Query
button and proceed to Step5.
• To access this feature via the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
116
English
•
or to Compose and press the Menu
Select button directly below Sel.
• Press the Menu Select button directly below
Exit to return to the Home screen.
4 or to Query and press the Menu Select
button directly below Sel for a predefined
message.
5 or to scroll through the list of messages and
press the Menu Select button directly below Sel
to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of it.
6 Use the keypad to edit the message, if required.
7 Press the Menu Select button directly below
Optn.
8 or to Send Message and press the Menu
Select button directly below Sel.
9 Perform one of the following actions:
• or to scroll through the address list and
highlight the required address.