Leveling The Washer - Haier HLP021-WM User Manual

Leveling the Washer

Your washer has an adjustable leveling leg that is located on the front right
corner. After properly placing your washer in its final location, you must level
the washer.
Warning! An "off-balance" washer will not function properly and can stop.
• Loosen the adjustable outer and larger ring of the fixed foot. The leveling leg
can be adjusted by turning the center foot counter-clockwise to raise the foot
and clockwise to lower the washer. Once the foot is at the right height, then
lock that position using the outer and larger ring of the fixed foot. This should
be done for all feet of the washer.
Note: If the washer is inclined more than 2˚, the machine will not operate.
Caster Option
This washer can convert from fixed feet to casters for mobility and portability.
The best time to change from fixed feet to casters is when installing the
bottom panel.
Unscrew and remove the fixed feet.
Screw each of the 4 casters to the bottom base by hand first, then use a wrench to
secure the caster's locking bolt to the washer body.
Locking caster;
Lift tab DOWN to lock and UP to unlock
Downloaded from www.Manualslib.com
Using a level is best practice.
manuals search engine
Leveling leg
Higher Lower
Leveling leg
English
12