Scan Mode With Triple And Dual Watch - Uniden UM455 Owner's Manual

How It Works
• To activate scan mode, press and hold
return to the previous mode.
• When the radio automatically stops on a channel, press
channel and resume scanning.
• To end the scan, press the microphone's
The radio remains on the last scanned channel.

Scan mode with Triple and Dual Watch

If you activate Triple Watch while
operating in scan mode, the radio
checks channels 16 and 67 every two
seconds, then goes on to scan the
next channel; with Dual Watch turned
on, the radio only checks channel 16.
08
Every 2 seconds,
the radio checks
channels 67 & 16
then goes on to
the next channel.
with Triple Watch on
Memory Channel Scan
10 11 12
67 16
Reversed 16 & 67
UJ-SW 20061215 #17
. Press and hold
CLR-SCAN
PUSH TO TALK, CALL-MENU,
Press and hold
microphone) for two seconds to turn Triple/
Dual Watch on or off. (To change between
Triple or Dual Watch, see page 18.) Press
and hold the
mode and set the radio to Triple/Dual Watch
mode.
13 14 15 17
17
CLR-SCAN
to leave that
CHANNEL UP
or
WX-MEM
(on the radio or the
16/67-TRI
key to turn off Scan
CLR-SCAN
20 24 25
again to
buttons.