Table of Contents
Advertisement
Display – Shows the call state, caller ID, dialed digits, network call control
messages, and elapsed time during calls. When not on a call, the date and
time of day are displayed.
Multifunction Buttons – These buttons are assigned to call appearances or
network features or one-touch numbers. Dual assignments such as One-
Touch and Call Appearance are not supported.
Function Buttons – Single-touch buttons for features, consisting of ADR
BOOK, CALL LOG, DROP , CONF, TRAN, REDIAL, HOLD, and SPKR.
• ADR BOOK – Allows access to store/retrieve phone numbers stored in
the telephone.
• CALL LOG – Shows lists of calls for both unanswered / answered
incoming and outgoing calls.
• DROP – Disconnects the last party added to a conference call, or
disconnects from a call when not in conference mode on some C.O.
Switches.
• CONF – Enables multiple parties (3 typically) to be on one call.
• TRAN – Places the current call on hold, selects an idle call appearance
for dialing another number so a call can be transferred.
• REDIAL – Dials the last number dialed on the phone.
• HOLD – Places existing call on hold.
• SPKR – Enables / disables the hands-free mode. When the speaker is in
use, a red indicator on the key is lit
Volume/Contrast Buttons – Increase or decrease display contrast (when
no call is active), or speaker / handset volume (when a call is active).
Message Indicator – A bright red indicator is lit when messages are waiting;
controlled by the network.
Numeric Keypad – Allows the user to dial telephone numbers, and send
DTMF tones to external equipment such as voice mail systems.
MIC-OFF Button – When pressed, the MIC-OFF key turns red and mutes the
handset and speaker MIC, this allows user to hold a private conversation.
MIC-OFF is de-activated as the default state.
Buttons – Used for volume control, LCD contrast, and toggling
up and down the option menu.
LAN Connector – Connector for the LAN cable.
PC Connector – Connector for a cable to a PC.
Power Connector – Connector for the AC Adaptor. Listed AC Adaptor marked
"Class 2" and rated 24V DC, 500mA should be used for this product.
LAN Lamp – A green indicator is lit when the system is successfully connected.
Rear Legs – Adjusts height of the set.
Handset/Headset Connector – Connects the Handset/Headset cord to the
telephone.
1
1-3
Advertisement
Table of Contents
