Table of Contents
Advertisement
4. Assign buttons to network-provided Intercom and Group Intercom
Press 4, then ENTER.
ICM/GIC MODE
SELECT ASSIGN KEY
From this point the Intercom and Group Intercom keys may be assigned
using the same process used to assign Call Appearances (selection 1 above).
5. Assign the network conference feature button
The CONF feature may be assigned to a key using the following process.
1. First assign CONF as a feature activator using the procedure outlined
above in section 2, Assign Buttons to network provided features.
2. Press 5, then press ENTER.
CONFERENCE MODE
SELECT ASSIGN KEY
3. Press Multi-function button designated as CONF . This screen appears:
CONFKEY = 18
4. Press ENTER.
CONFKEY = 18
COMPLETED
6. Assign the transfer key
1. Press 6, then press ENTER.
TRANSFER MODE
SELECT ASSIGN KEY
2. Press Multi-function button designated as TRAN, the following display
is shown.
TRANSFER MODE
TRANS KEY=(20)
3. Press ENTER.
TRANS KEY=(20)
COMPLETED
Note:
If the user selects a key that cannot be used for TRAN, the following display
is shown:
SELECT ASSIGN KEY
INVALID SELECTION
FA=18 or 60
FA=18 or 60
FA=20 or 61
FA=20 or 61
3
3-13
Advertisement
Table of Contents
