Table of Contents
Advertisement
Setting-Up SPID (Option 8)
The Service Profile Identifier (SPID) identifies your set to the network. The
SPID for your phone may be given to you by your service provider, or it may
be downloaded automatically by the C.O. switch at installation.
Auto SPID
If your C.O. switch supports Auto SPID, this function starts when either the
telephone is powered-on and a SPID is not present, or when the SPID has
been manually cleared.
3
Auto-SPID displays the following screens:
If only one SPID is available, the SPID is assigned, and the following screen is
displayed:
If two or more SPIDs are available, select one as follows.
Scroll through the available SPIDs. Press
through the SPID numbers.
Press ENTER when the ">" is pointing to the correct SPID.
After SPID selection is completed, the telephone will automatically request a
parameter download from the C.O. switch. The set will be ready to use once
the download is complete.
3-2
AUTO SPID REQUESTING
01010101010101
SPID SELECTION COMPLETED
50555512120101
1>50555512120101
50555512130101
SPID SELECTION COMPLETED
50555512120101
(up) and
(down) keys to scroll
SP/AU/PB
Advertisement
Table of Contents
