Tos / Diffserv Setup (Option 23) - Fujitsu SRS-12I Administrator's Manual

TOS / Diffserv Setup (Option 23)

The Type of Service (TOS) and Diffserv settings provide adjustable parameters
to modify the quality of service desired for voice traffic. Refer to Appendix A,
QoS Setting for more details. To make changes, follow the steps below:
To set-up TOS, follow the steps below:
1. Press OPTIONS, numeric key "2", "3", then ENTER.
3
2. Press ENTER.
3. Enter 8 digits of numeric Administrator password (see Administrator
Password Registration in chapter 4). Then ENTER.
*Factory default Administrator Password – 99999999
4. Press 1 then ENTER.
5. If TOS has been already set up, the last TOS level is displayed. The
default signaling value (5) is set upon the shipment from the
manufacturer.
6. Key selected TOS value from the range of 0 – 7, then press ENTER.
7. If Voice value has been already set up, the last Voice level is displayed.
The default voice value (5) is set upon the shipment from the
manufacturer.
Select the value from the range of 0-7.
3-22
TOS / DIFFSERV SETTING
TOS S=5
ENTER ADM PASSWORD
ENTER ADM PASSWORD
********
1: TOS
TOS SETTING
SIGNALING=5
TOS SETTING
SIGNALING=7
TOS SETTING
VOICE=5
TOS SETTING
VOICE=6
V=5
2: DIFFSERV
(SELECT 1-2)
(SELECT 0-7)
(SELECT 0-7)
(SELECT 0-7)
(SELECT 0-7)