Standard System Configuration - Bosch DIVAR IP 6000 (2U) Quick Installation Manual

DIVAR IP 6000 (2U)
IP Helper tool
The IP Helper tool is available for download as follows:
–
–
–
To start the IP Helper tool:
1.
2.
3.
5.4

Standard system configuration

The system is delivered with the fully configured iSCSI target and pre-configured LUNs.
The default target name is TG0 and holds all of the iSCSI LUNs.
The naming convention for the LUNs is VHDxx.vhdx where <xx> ranges from 01 up to <n>
depending on the system used. The default setup allows every iSCSI Initiator (iSCSI host) to
connect to the system.
The system comes with iSCSI Target Service enabled.
Notice!
On empty systems you must set up the iSCSI target and the iSCSI LUNs of the drives
manually after initial RAID configuration.
Bosch Sicherheitssysteme GmbH
in the online catalog on the DIVAR IP 6000 product page
under http://mydivar.com
under http://downloadstore.boschsecurity.com/
Double-click iphelper.exe.
A dialog box opens that displays all IP devices with their IP addresses located in the
network. Search for the devices whose network settings you want change.
Change the IP address.
Quick Installation Guide
System Setup – first Steps | en
2016.03 | V2 | DOC
21